Subwoofer enclosures
designed from scratch

Every enclosure is drawn around your car and your driver — with a finished cut list, so you build it right the first time.

Design + cut listDKK 200 — 3D model and a list of every panel with dimensions
Design + cutting diagramDKK 250 — 3D model and a drawing of how the panels are cut from full sheets, instead of the list
Payment MobilePay
Delivery time Usually the same day, 3 days at most
Order now
See a real example
Process

How it works

01

You send us your measurements

Your car, your subwoofer — make and model — how many, and how much room there is. Under Anything else you tell us what the enclosure should do: SQ, SPL or somewhere in between. No account, and no payment yet.

02

We design the enclosure

We work out how big the enclosure needs to be, so the sub plays deep and clean without bottoming out. You can follow along on your own order page.

03

You approve, then download

You look the design over and approve it before anything is paid. Then you download the 3D model and the cut list with dimensions and screw spacing — or the cutting diagram, if you chose it. It all sits on your own order page.

Designs

Example enclosures

A selection of the enclosure types we draw — from a simple sealed box to a folded port and several subwoofers in the same enclosure.

Ported enclosure with a slot port in the middle, 2× 12 inch, 156 L, 30 Hz
Ported

Slot port · 2 subs

Two 12" in a folded slot port, 156 L tuned to 30 Hz. The top is off, so you can see the port path and the bracing.

Ported enclosure with the port tubes in the side panel, seen with the top off
Ported · tube

Port tubes in the side

The tubes exit through the side panel — the whole front is free for the drivers, and the enclosure can stand tight against something.

Ported enclosure with a slot port in the right-hand side, 1× 12 inch, 78 L, 34 Hz
Ported

Slot port · 1 sub

A single 12" with the port folded down the right-hand side, 78 L tuned to 34 Hz.

Sealed enclosure with an angled rear panel, 1× 10 inch, 23 L
Sealed · angled

Angled rear panel

Sealed enclosure with an angled back, so it sits flush against a rear seat. A single 10" in 23 L.

Round sealed enclosure for the spare wheel well, 2× 8 inch, 30 L
Sealed · round

Round enclosure

Built for the spare wheel well — two 8" in 30 L, so the boot floor stays where it is.

The difference custom makes
Property

Off the shelf

Built for you

Fit in the boot
Off the shelfGeneric dimensions, often wasted space
Built for youDrawn to your actual measurements
Volume for your driver
Off the shelfA compromise across several models
Built for youCalculated from your driver and the space you really have
Port tuning
Off the shelfFixed, and rarely even stated
Built for youTuned and calculated for the sound you want
Ordering

Describe your setup

Prices and examples are at the top of the page. You approve the design before anything is paid — and download the files once payment is done.

  • If you have messaged us on Facebook, we confirm your order there.
  • If you have not, we send the confirmation by e-mail.

Design is paid by MobilePay.

Max size approx. (cm)

That is the space in the car.

You get your own order link right away — the moment you order.

✓

Thank you for your order

Its number is .

Follow your order →

This is your own link to this exact order. Keep it — it is your way to the design, the images and the drawings, and it only works for your order.

We also send you the link: in a message on Facebook if you have messaged us there – otherwise to your email.

We will get back to you the same day – within 3 days at most.